WINLINK via VHF ax.25 packet is coming soon to Green Bay.
This is a placeholder for further information.
Green Bay WINLINK RMS gateway
Re: Green Bay WINLINK RMS gateway
Hello,
Is this up and running? I think looking at the Winlink site it is. I'm going to need to do a little more reading to figure out what all I need to get to connect.
Is this up and running? I think looking at the Winlink site it is. I'm going to need to do a little more reading to figure out what all I need to get to connect.
Re: Green Bay WINLINK RMS gateway
It's currently running in my garage as a placeholder. (edit 28Feb21 -- on-air in DePere) Waiting for some site infrastructure to be completed, then it'll be on-air in DePere.
Connecting is actually quite simple - You'll need client software (https://winlink.org/ClientSoftware), a TNC (either hardware or soundcard based), and a vhf radio.
For windows, I'd recommend Winlink Express (https://winlink.org/WinlinkExpress), and either a TNC-X (unfortunately no longer produced) or signalink usb w/ soundmodem software (http://uz7.ho.ua/packetradio.htm). I've used both setups with great success.
I'll update here once the system is 'officially' on-air.
Connecting is actually quite simple - You'll need client software (https://winlink.org/ClientSoftware), a TNC (either hardware or soundcard based), and a vhf radio.
For windows, I'd recommend Winlink Express (https://winlink.org/WinlinkExpress), and either a TNC-X (unfortunately no longer produced) or signalink usb w/ soundmodem software (http://uz7.ho.ua/packetradio.htm). I've used both setups with great success.
I'll update here once the system is 'officially' on-air.
Last edited by kc9uhi on Sun Feb 28, 2021 8:07 pm, edited 1 time in total.
Reason: on-air in DePere
Reason: on-air in DePere
Re: Green Bay WINLINK RMS gateway
The KC9UHI-8 packet node in DePere is on-air.
Connect with 1200 baud ax.25 to KC9UHI-8 or the node alias of WIGRB on 145.030 MHz.
(Common syntax of node alias and node callsign looks like ALIAS:CALL, for example WIGRB:KC9UHI-8. Typically sending a connect request to either the node alias or callsign results in the same thing)
Once connected to WIGRB:KC9UHI-8, connect to KAUNOD:KC9UHI-7. From here, connections to nodes worldwide, the full service BBS, and a local chat server are available. Connections to other local nodes are possible once they become active.
Direct connection to KC9UHI-10 for Winlink is also available.
Hardware:
WIGRB is using a raspberry pi B+ with a tnc-pi (http://tnc-x.com/TNCPi.htm) interfaced to a Motorola Radius M120 set to 38W. System is located at a temporary site with good area coverage.
Drop me a message at KC9UHI@KC9UHI.#ECWI.WI.USA.NOAM
Connect with 1200 baud ax.25 to KC9UHI-8 or the node alias of WIGRB on 145.030 MHz.
(Common syntax of node alias and node callsign looks like ALIAS:CALL, for example WIGRB:KC9UHI-8. Typically sending a connect request to either the node alias or callsign results in the same thing)
Once connected to WIGRB:KC9UHI-8, connect to KAUNOD:KC9UHI-7. From here, connections to nodes worldwide, the full service BBS, and a local chat server are available. Connections to other local nodes are possible once they become active.
Direct connection to KC9UHI-10 for Winlink is also available.
Hardware:
WIGRB is using a raspberry pi B+ with a tnc-pi (http://tnc-x.com/TNCPi.htm) interfaced to a Motorola Radius M120 set to 38W. System is located at a temporary site with good area coverage.
Drop me a message at KC9UHI@KC9UHI.#ECWI.WI.USA.NOAM
Re: Green Bay WINLINK RMS gateway
Anticipated coverage maps, calculated based on a home station using a simple vertical omni antenna at about 20 feet elevation. Actual results may vary.
Current temporary location
Future permanent location
Current temporary location
Future permanent location
Who is online
Users browsing this forum: No registered users and 1 guest