As Matt knows I have been trying to get this running, mostly for Bob as I believe he does a private scanner feed over Zello.
https://forums.radioreference.com/threa ... st-3332366
Use the 2020-05-27-raspios-buster-full-armhf image...
(Create a blank file callled ssh on the /boot partition of the sd card to enable ssh at boot... duh)
cd ~
sudo apt-get update
sudo pip3 install websocket
# not sure which one is correct
#pip3 install websocket-client-py3
sudo pip3 install pyaudio
sudo pip3 install opuslib
pip3 install pycryptodome
--
You need to change the default audio device to the USB dongle
The USB sound device can be made the default audio device by editing a system file “alsa.conf” :
sudo nano /usr/share/alsa/alsa.conf
Scroll and find the following two lines:
defaults.ctl.card 0
defaults.pcm.card 0
Change the 0 to a 1 to match the card number of the USB device :
defaults.ctl.card 1
defaults.pcm.card 1
--
This resolves all the needed stuff and runs as:
pi@raspberrypi:~/zellostream $ sudo python3 zellostream.py
if you get a sslv3 error when the vox level is tripped and is started to stream, check that your time zone is correct!